Barron Lifts - Access Lifts Technical details

Installation

Only a 50 mm pit is required alternatively we can provide a ramp. There is no need for any machine room since the machinery and controller are contained within the unit itself.

Structure

The lift consists of a platform travelling inside a smooth shaft. It is supplied within its' own structure of double skinned insulated steel panels or optional glass panels.

Platform

The L-shaped platform is constructed of steel with non-slip flooring. A 1.1 metre high wall to one side contains the push buttons, emergency lighting and hand rail. Safety edges are fitted to all sides.

Benefits

Easy to install Easy to operate
Easy to maintain
Low overall cost
No separate shaft required
No Machine room required
No Pit Required
No Major building work required CE marked

Access Lift -Technical Specifications

The rotating nut assembly moves the platform up and down along the screw which provides a smooth and comfortable ride. The drive system is self-sustaining and in the case of drive nut failure a safety nut will secure the lift. If this occurs the platform will stop and can be moved with a handle easily accessible from outside of the lift on the upper landing.

Rated load 400 kg
Speed 0.15 m/s
Travel 9.0m
Motor 2.2KW 415V, 3 phase, 50 Hz
Platform 1000 x 1480 mm
Overall footprint 1375 x 1600 mm

Options

Single phase electrical supply
Key Controls
Automatic door openers
Increased load (630 kg)
Battery Back up
RAL colour finish
Door type Ramp
Alternative platform size

Finishes

As standard the doors and door fronts are white powder coated. The platform panels are made of PVC laminate steel sheet in white with the middle panel powder coated in sand colour.

Download PDF
Contact Us for Quotation

Access Lifts
Medium Rise Lift
Low Rise Lift
Personal Lift
WheelChair Platform Lifts